Related Manuals for Necta Vending Solutions SpA Sfera
Summary of Contents for Necta Vending Solutions SpA Sfera
- Page 1 INSTALLATION, USE AND MAINTENANCE MANUAL Sfera English DOC. NO. H 211U 02 EDITION 2 2004-04...
- Page 3 DICHIARAZIONE DI CONFORMITA’ DECLARATION OF CONFORMITY DÉCLARATION DE CONFORMITÉ KONFORMITÄTSERKLÄRUNG DECLARACIÓN DE CONFORMIDAD DECLARAÇÃO DE CONFORMIDADE VERKLARING VAN OVEREENSTEMMING INTYG OM ÖVERENSSTÄMMELSE OVERENSSTEMMELSESERKLÆRING YHDENMUKAISUUSTODISTUS Valbrembo, 03/05/2001 Dichiara che la macchina descritta nella targhetta di identificazione, è conforme alle disposizioni legislative delle direttive: 89/392, 89/336, 73/23 CEE e successive modifiche ed integrazioni.
-
Page 5: Table Of Contents
USER INTERFACE PAGE 12 POWER SUPPLY UNIT PAGE 28 DIRECT SELECTIONS PAGE 12 ACCESS TO THE COOLING UNIT PAGE 28 NORMAL OPERATING MODE PAGE 12 MENU SUMMARY PAGE 31 WIRING DIAGRAM PAGE 57 © by NECTA VENDING SOLUTIONS SpA 0404 211-02... -
Page 6: Introduction
It also assists in the spare parts management. Fig. 1 Product code Serial number Model Frequency Type Operating voltage Current Absorbed power Type and amount of refrigerant Refrigeration system class © by NECTA VENDING SOLUTIONS SpA 0404 211-02... -
Page 7: Using The Vending Machine
The machine should be positioned with a maximum incli- (see the identification plate), should be recovered by nation of 2°. qualified companies by means of special equipment. If necessary provide proper levelling by way of the adjust- able feet included. © by NECTA VENDING SOLUTIONS SpA 0404 211-02... -
Page 8: Technical Specifications
Executive, MDB, BDV and MDB 24 V DC validators. Beside the coin mechanism housing, suitable space is provided for the installation (optional) of the most widely used payment systems. © by NECTA VENDING SOLUTIONS SpA 0404 211-02... -
Page 9: Changeable Combination Lock
Generally, only the use key (silver) is used, while the The keys with the old combination cannot be used for combination change keys (gold) can be kept as spares. the new combination. Fig. 3 © by NECTA VENDING SOLUTIONS SpA 0404 211-02... -
Page 10: Loading And Cleaning
(one right-hand spiral in each product holder) for Most bottles can be dispensed without using any special small size products. accessories, loading the bottles up side down, so that the cap slides in the compartment channel. © by NECTA VENDING SOLUTIONS SpA 0404 211-02... -
Page 11: Hygiene And Cleaning
Before any maintenance operation always switch the machine off. The integrity of the machine and compliance with the standards of the relevant systems must be checked at least once a year by qualified personnel. © by NECTA VENDING SOLUTIONS SpA 0404 211-02... -
Page 12: Loading Products
NOISE LEVEL The continuous, weighted equivalent acoustic pressure level is below 70 dB. © by NECTA VENDING SOLUTIONS SpA 0404 211-02... -
Page 13: Installation
- loosen the fastening screws and adjust the selector opening lever; - to aid installation the coin mechanism support plate can be lifted and rotated. © by NECTA VENDING SOLUTIONS SpA 0404 211 - 02... -
Page 14: Connecting To The Power Supply
THE MANUFACTURER DECLINES ALL RESPONSI- BILITY FOR ANY DAMAGE CAUSED BY NON-COM- PLIANCE WITH THE ABOVE MENTIONED PRECAU- TIONS. © by NECTA VENDING SOLUTIONS SpA 0404 211 - 02... -
Page 15: Main Switch
11 - Payment system compartment lock 12 - Compartment opening handle 13 - Coin mechanism support 14 - Product passage photocells 15 - Power supply unit 16 - Door switch © by NECTA VENDING SOLUTIONS SpA 0404 211 - 02... -
Page 16: Operating Modes
Price button is used to access directly the price/selection combination of time band 0, if the function is enabled in the “Programming” menu. © by NECTA VENDING SOLUTIONS SpA 0404 211 - 02... -
Page 17: Statistics
Press the confirm button “ ”, and the message “Con- firm?” starts blinking. Press the confirm button “ ”, the message “Working” is displayed for a few seconds and all statistics are reset. © by NECTA VENDING SOLUTIONS SpA 0404 211 - 02... -
Page 18: Test
With this function the counters that control the pre-alarms are reset. EVADTS TRANSFER When activating this function, the machine awaits the connection with a device to acquire the EVADTS statis- tics. © by NECTA VENDING SOLUTIONS SpA 0404 211 - 02... -
Page 19: Technician Menu
Promotional message Security code Personalised strings Connection Display counters Contrast control Pin code Pre-alarms Thresholds Miscellaneous Password Counters Energy saving Threshold association Menu masking Fluorescent lamps Bank Number switched off © by NECTA VENDING SOLUTIONS SpA 0404 211 - 02... -
Page 20: Present Failures
Scrolling through all failed motors is automatic. By confirming this function all current failures will be reset. Note: By restarting the machine any blocked motors are de- tected as not present. © by NECTA VENDING SOLUTIONS SpA 0404 211 - 02... -
Page 21: Programming The Parameters
- U-Key VALIDATORS When the “Validat. Lines” (line setting) function of the “technician” menu is displayed, the value of the 6 validator coin lines, A to F, can be changed. © by NECTA VENDING SOLUTIONS SpA 0404 211 - 02... - Page 22 Any credit exceeding the amount programmed with this XXX.X function will be cashed. XX.XX X.XXX Press the confirm button “ ”, these values will start blinking and can then be modified as necessary. © by NECTA VENDING SOLUTIONS SpA 0404 211 - 02...
- Page 23 PRODUCT CODE This function is used to assign a 4-digit identification code to each spiral for processing the statistics. © by NECTA VENDING SOLUTIONS SpA 0404 211 - 02...
- Page 24 LCD CONTRAST CONTROL This function is used for adjusting the display contrast from 5% to 99% (default). © by NECTA VENDING SOLUTIONS SpA 0404 211 - 02...
-
Page 25: Statistics
When pressing the confirm button “ ” the data described “Energy saving” time band. in the paragraph “Printing the statistics” is sequentially displayed. © by NECTA VENDING SOLUTIONS SpA 0404 211 - 02... - Page 26 Total value of dispensing paid differently; for example also other types of payment (C.P.C., token). Aud. 10 Manual filling Money inserted in the coin mechanism through the manual filling function. © by NECTA VENDING SOLUTIONS SpA 0404 211 - 02...
-
Page 27: Test
If fitted on the machine, the 5 buttons are checked sequentially. Press the button requested on the display; if it works correctly the request for the next button is presented. © by NECTA VENDING SOLUTIONS SpA 0404 211 - 02... -
Page 28: Evadts Codes
“slave GSM” function, therefore sending data of the “master” machine via modem. The number 0 identifies the machine that is connected directly to the modem, i.e. the “master GSM”. © by NECTA VENDING SOLUTIONS SpA 0404 211 - 02... -
Page 29: Maintenance
- Coin mechanism setting minidips (SW2) - J13 Expansion for BDV / EXE EPROM. Warning! When downloading the software it is advisable to discon- nect the motor connectors from the CPU board(J1 e J2) © by NECTA VENDING SOLUTIONS SpA 0404 211- 02... -
Page 30: Configuring The Trays
If necessary slide the ejector along the spiral wire to locate the most appropriate position according to the product being dispensed. Fig. 19 1 - Spirals 2 - Ejectors © by NECTA VENDING SOLUTIONS SpA 0404 211- 02... -
Page 31: Changing The Number Of Trays
Fig. 24 1 - Tray 2 - Mobile walls 3 - Right-hand spiral 4 - Left-hand spiral © by NECTA VENDING SOLUTIONS SpA 0404 211- 02... -
Page 32: Power Supply Unit
ACCESS TO THE COOLING UNIT Fig. 27 If for any reason the cooling unit need to be accessed from the machine, do as follows: Evaporator Condenser Dispensing compartment Dispensing compartment lock device © by NECTA VENDING SOLUTIONS SpA 0404 211- 02... -
Page 61: Wiring Diagram
OPEN DISP COMPT FLAP SWITCH PUSH-BUTTON BOARD LIQUID CRYSTAL DISPLAY STARTER M1-... RELEASE MOTOR C.P.U. BOARD DISPENSING COMPARTMENT LOCK MO TRANSFORMER CONNECTOR FOR MDB COIN MECHANI TX..DELAYED FUSE (X=COURRENT) © by NECTA VENDING SOLUTIONS SpA 0404 211 - 02... - Page 62 sx38500...
- Page 63 Sfera...
- Page 64 sx38601...
- Page 65 Sfera...
- Page 66 © by NECTA VENDING SOLUTIONS SpA NOTE...
- Page 67 The Manufacturer reserves the right to modify, without prior notice, the characteristics of the equipment described in this publication; and further declines to accept any responsibility for any inaccuracies contained in this publication which can be ascribed to printing and/or transcription errors. All instructions, drawings, tables and information contained in this publication are confidential and can neither be reproduced completely or in part, nor be transmitted to third parties without the written permit of the Manufacturer, who has the sole owner- ship.
Need help?
Do you have a question about the Sfera and is the answer not in the manual?
Questions and answers