Sony Cyber-shot DSC-T1 Firmware Update Manual page 9

Check the firmware version in your camera
•
Turn the mode-switch to PLAY mode.
•
While pressing the menu button, turn the camera on.
•
Select SETUP 2 > VERSION and check the Version number.
•
It should be the new one.
Possible problems during re-updating
If the access lamp of the Memory Stick blinks during re-updating or the access lamp doesn't
turn off after 3 minutes, a failure may have occurred with the camera or the Memory Stick.
Solution: Please contact a local Sony Service Center for repair options.
(C) Copyright 2003 Sony Europa BV, all rights reserved.
Sony, Cyber-shot, Memory Stick, Memory Stick PRO, Memory Stick Duo, and Memory Stick PRO Duo are
registered trademarks of Sony Corporation, Japan. Other names and products may be trademarks of their
respective owners.
9