Sony Cyber-shot DSC-T1 Firmware Update Manual page 8

Proceed:
•
If the circles are not fully lit, and they do not blink for over 30 seconds:
Cause:
Solution:
Proceed:
Re-updating procedure in case of error 10 or if the circles are not fully lit, and they do not
blink for over 30 seconds: Memory Stick PRO Duo is not available for re-updating. Only
„blue" Memory Stick Duo is applicable for this operation.
•
Leave the Memory Stick Duo in the camera.
•
Unplug AC power supply adapter.
•
Wait for 5 seconds.
•
Plug in the AC power supply adapter.
•
The red Memory Stick Duo access lamp will turn on. The camera's screen stays black.
•
Approximately 2 minutes later, the red Memory Stick access light will turn off.
Please push the "RESET" button by some sharp-pointed stuff, then set data mentioned below
again before you check the firmware version number, because after pushing the reset button
those data are initialised.
Volume, Beep, Metering Mode, White Balance, ISO, Picture Effect,
Sharpness, Saturation, Contrast, Scene Selection, EV, AF Range Finder Frame,
Multi Burst Shutter Interval, AF Mode, Digital Zoom, AF Illuminator,
BRK (Bracket Step), Macro Mode, Flash Mode, Slide (Interval, Image, Repeat),
OSD On/Off, Histgram On/Off, LCD Backlight On/Off, Picture Quality,
Image Size, Camera Mode, Date/Time, Control Button Position,
Flash Level, Red Eye Reduction, USB Connect
Great user manuals database on
• You tried to upgrade your camera with the wrong software
• The file on the Memory Stick Duo media is not containing firmware
• You already have the same version in the camera.
Check the firmware version in your camera and Download the latest
firmware update file to your PC (refer to Step 1)
The update has failed.
Unplug AC power supply adapter.
Re-updating (see next chapter)
UserManuals.info
(Sample Ima ge)
8