Table of Contents
Advertisement
1.
Understand that your safety and the safety of other persons are measured by how you service and operate this machine. Know the
positions and functions of all controls before you try to operate them. Check all controls in a safe area before starting your work.
2.
The safety information given in this manual does not replace safety codes, federal, state, or local laws. Ensure your machine has the
proper equipment as designated by local laws and regulations.
3.
A frequent cause of personal injury or death is from persons falling off equipment and being run over. Do not permit persons to ride
on this machine.
4.
Secure safety chain to towing vehicle before transporting. Do not transport without safety chains being attached to tow vehicle.
5.
Use good judgment when transporting on a highway. Always maintain complete control. Regulate speed to road conditions.
WARNING: BE SURE ALL LIGHTS ARE WORKING PROPERLY BEFORE HIGHWAY TRAVEL.
6.
Travel speeds should be such that complete control and machine stability is maintained at all times.
7.
Where possible, avoid operating near ditches, embankments and holes. Reduce speed when turning, crossing slopes and rough, slick
or muddy surfaces.
8.
Make sure that the header is fastened securely to the transport before moving.
9.
Make sure that everyone is clear of equipment before applying power or moving the machine. NEVER position yourself under or near
header when mounting on header transport.
10. Never adjust, service, clean or lubricate the header transport until all power is shut off.
11. Ensure the implement is fastened securely to the towing unit.
12. Before unhooking the implement from the towing unit, properly block the wheels to prevent the implement from moving.
13. Never overload the header transport. Overloading the header transport is dangerous and can cause extensive damage.
14. COMPLY WITH ALL SAFETY WARNINGS AND CAUTIONS IN THIS MANUAL AND IN THE COMBINE OPERATOR'S MANUAL.
Model
Upper Bar Capacity Wheel Size
4WS18-HD-38
38'
4WS15-HD-42
42'
4WS17-HD-48
48'
52'
4WS18-HD-52
Safety Rules
Specifications
D
A
13,000 lb 16" x 6" - 8 Bolt
13,820 lb 16" x 6" - 8 Bolt
13,580 lb 16" x 6" - 8 Bolt
16,300 lb 17-1/2" x 6-3/4" - 8 Bolt 215/75R17.5H 4,810 lb 12'-9" 54'-2" 7'-2" 60'-3" 34'-0"
Spindle Size
Steel Upper Bar Box Channel Axle Frame
2" Diameter
6" x 10"
B
E
Tires
Weight A
235/85R16F
4,390 lb 13'-4" 40'-2" 7'-2" 52'-6" 34'-0"
235/85R16F
3,600 lb 12'-9" 44'-2" 7'-2" 50'-3" 26'-9"
235/85R16F
3,845 lb 12'-9" 50'-2" 7'-2" 56'-4" 30'-0"
8"
C
B
C
D
E
11
Advertisement
Table of Contents
