Table of Contents
Advertisement
Timer recording radio programs
(continued)
7
Press – or + (. or >) on the
remote repeatedly to select the desired
day.
If you select "DAILY?" in step 5, proceed
to step 9.
8
Press ENTER/YES on the remote.
The hour indication flashes.
9
Set the starting time.
Press – or + (. or >) on the remote
repeatedly to set the hour, and then press
ENTER/YES on the remote.
The minute indication begins flashing next.
Press – or + (. or >) on the remote
repeatedly to set the minute, and then press
ENTER/YES on the remote.
The day indication or the hour indication
flashes again.
10
Set the stopping time by repeating step
7 to 9.
11
Select the recording mode (e.g., LP2)
by pressing . or > on the remote,
and then press ENTER/YES on the
remote.
The timer recording settings appear, then
the original display returns.
12
Load a recordable MD.
13
Press @/1 to turn off the system.
42
Downloaded from:
https://www.usersmanualguide.com/
To
Do this
Check the settings
Select the timer number (REC
1 to 3) in step 2 of "Activate/
Cancel the timer", then press
ENTER/YES on the remote.
The last setting appears.
Activate/Cancel
1 Press CLOCK/TIMER
the timer
SELECT on the remote, then
press . or > on the
remote repeatedly until "REC
SELECT?" appears and press
ENTER/YES on the remote.
2 Press m or M on the
remote repeatedly to select
the timer number (REC 1 to
3), then press . or > on
the remote repeatedly to
select the timer number (set)
or "–" (cancel) and press
ENTER/YES on the remote.
If you have not set the
recording timer, "." appears
instead of the timer number
or "–".
Change the setting
Start over from step 1.
Advertisement
Table of Contents
