Priming Your Eqpen - Nemera Eqpen User Manual

priming your Eqpen

®
4
Step 11
Using the dose selector, choose 0.2 testing units of somatropin.
Turn the dose selector clockwise
until the figure 0.2 appears in the selector window.
Step 12
Take the pen with the needle pointing upwards. Using your thumb, slide
the release button in the direction of the needle.
Hold the release button until a green dot appears
in the window displaying the end of the injection.
If a drop of somatropin does not appear at the end of the needle, repeat steps
11 and 12. If a drop of somatropin does not appear after several attempts, remove
the needle in accordance with step 17. Repeat steps 7 through 12, afterwards.
Prime your Eqpen ® before each injection.