Restore Factory Settings; Maintenance And Cleaning - HomeMatic plus Installation And Operating Manual

8

Restore factory settings

The device's factory settings can be restored. If you do this, you will
lose all your settings.
To restore the factory settings of the device, please proceed as follows:
• Press and hold down the system button (D) using a pointed ob-
ject (e.g. a pen), until the LED (D) starts to quickly flash orange for
4 seconds (see figure 10).
• Release the system button.
• Press and hold down the system button again for 4 seconds, until
the LED lights up green (see figure 11).
• Release the system button again to conclude the procedure.
The device will perform a restart. After the restart, you can again integrate
your device into your Homematic IP system.
9

Maintenance and cleaning

The product does not require any maintenance. Enlist the help of an
expert to carry out any repairs.
Clean the device using a soft, lint-free cloth that is clean and dry. Do not
use any detergents containing solvents, as they could corrode the plastic
housing and label.
Restore factory settings
35