Advertisement
INTRODUCTION
The Mega-Post PCI-Diagnostic Card is a powerful diagnostic tool for technicians and administrators to
troubleshoot various problems of IBM compatible PCs. It is easy to install, yet extremely powerful to use. With
Diagnostic Card in hand, you no longer have to go through tedious and time consuming process of
trying to figure out what is wrong with your PC hardware. The Mega-Post PCI-Diagnostic Card will tell you
exactly what is wrong with your PC in just seconds. It saves you time and money.
Our new and improved design of the Mega-Post PCI-Diagnostic Card can work with almost all
popular types of CPUs, Motherboards, and BIOSes..
Trademarks
The Mega-Post PCI-Diagnostic Card is a trademark of Handelsvertretung Ellerhorst with all rights reserved.
IBM PC, PCjr, IBM PC XT, IBM AT, and PS/2 are trademarks of international Business Machines Co., Inc.
Pentium is a trademark of Intel Corporation.
System Requirements
The Mega-Post PCI-Diagnostic Card itself only requires an empty PCI or ISA expansion slot. It is not necessary
to install memory chips to perform analysis. "POST Codes" can be displayed through the hexadecimal display
panel on the Diagnostic Card itself.
Tech Support
l
Tech Support
Mega-Post PCI-Diagnostic Card Indicators
'Indicators' are any light emitting diodes(LED) or hexadecimal display panel that may be
mounted on an Diagnostic Card. This section discusses the following indicators that appear on the Mega-Post
PCI-Diagnostic Card:
l
Dual POST Code Display
l
PCI BUS SIGNALS LEDs
POST Code Display
The POST Code Display is made up of a dual, dot matrix hexadecimal read-out that displays
Power On Self Test (POST) status codes.
0049/(0)8766/9394-17
2
User's Guide
Advertisement
