Table of Contents
Advertisement
STOR.E TV+
The usage of Samba
STOR.E TV+ contains an operating system (Linux+AP) and application
software (Samba).
STOR.E TV+ supports the function of Samba through which you can visit
your hard disk's files in your device directly. It is necessary to make your
computer and device in the same network. Before using this function, it
must connect STOR.E TV+ and the computer to the network.
Setting IP address
You can obtain device's IP address according to Network Setup process
described above.
Refer to
Samba interface
When you have obtained the STOR.E TV+'s IP address, launch your web
browser, type the correct IP address into the browser to view the Samba
interface. You can also input the IP address in your computer's address
column, then press ENTER to open the Samba interface. It will display the
partition of the device's hard disk. Thus you can read, delete, copy files or
add new directory from this Samba interface.
EN-44
"Network Setup" on page 33
section for more details.
User's Manual
Advertisement
Table of Contents
