First Boot - Toshiba STOR.E TV+ User Manual

STOR.E TV+

First Boot

When STOR.E TV+ is booted up for the first time, you will need to select
your language and the TV system output using the remote control. Use the
navigation keys on the remote control to select the language you wish to
use and press OK. If your language is not available, check the
Firmware Upgrade" on page 45
languages through a firmware update. Not all languages are supported.
(Sample Image) First boot - language setup interface
After selecting your language, it will go to the TV system interface and allow
you to select the appropriate TV system output. If you are not sure which
one should be selected, it is recommended to select HDMI Auto.
(Sample Image) First boot - TV system setup interface
EN-22
section as Toshiba may provide other
"System
User's Manual