4
4
5
5
Note
• The outer blade surface may get a little warm during
Clean
Cleaningtheblade
Howtoremovetheblade
1. Make sure the power switch is in the "0" position.
2. Rotate the outer blade in the direction of
3. Pull to remove the outer blade.
4. Separate the inner blade from the outer
14
ER-GN20_CH.indb
14
Afteruse,slidethepowerswitchtothe"0"
positiontoturntheapplianceoff.
Attachtheprotectivecap.
use, but performance will not be affected. If you are
worried about the blade becoming warm, let it cool
down before use.
the arrow, and align the marks.
blade carefully.
2012/01/27
13:40:59