Table of Contents
Advertisement
Assembly
7. Pour the Flame Glass (K) around the burner. Ensure Flame Glass is
not placed or blocking the Ignition Screen of the burner.
DO NOT COVER THE IGNITION SCREEN when placing the
flame glass into the firebowl. Always keep ignition screen visible.
8. Fire table assembly is now complete. At the bottom of legs, there are four
adjustable screws. Consumer can adjust the screws to an even height.
9. Put the lid (L). then the Protective Cover (E) on the fire table when the
fire table is NOT in use or after use, when the fire table has cooles down
COMPLETELY. This will prevent water from accumulating in the Firebowl
Pan and to protect exterior surfaces.
Page 12
7
8
9
Ignition Screen
Advertisement
Table of Contents
