U N PAC K I N G Please kindly check if the packaging of the Gaia phono stage has not been damaged during transit. If you find any damages, please immediately contact your dealer. Remove the preamplifier and accessories from the packaging. Make sure that the content is not damaged.
Page 4
Press power button on the side of the phono preamplifer. Gaia phonostage is eqiupped with audio ground loop switch. If you will have problem with excessive hum, please switch ground loop switch to ON or Off position.
Make sure all cables are connected as described above. Select the signal source using the selector located on the front panel of the amplifier. Set the volume knob to minimum. Power on the Gaia preamplifier. Make sure the turntable is turned on and gradually increase the volume with the volume knob at your amplifier.
Need help?
Do you have a question about the GAIA and is the answer not in the manual?
Questions and answers