RDL-3000 RAS-X LV
GPS Antenna Port
The GPS antenna port (TNC / F connector) conducts RF signals from an attached GPS
antenna. This is a passive GPS antenna type.
A factory-installed protective weatherproof plastic cap is installed on the GPS antenna
port. The port must be weatherproofed if this cap is removed.
Note: The GPS module does not set the internal date/time clock.
2.3
Data & Power Adapter Unit
End-user connections for power and network are made directly to the RAS-X LV Data &
Power Adapter Unit. AC and DC versions are available with unique power connectors.
Power Input Port
The RAS-X LV is available for AC or DC power sources. The system is supplied with a
non terminated weatherproof power connector. The installer must provide the power
cable and terminate the cable to the power plug in accordance with the following wiring
and assembly diagrams.
AC Connector Wiring
70-00174-03-00
SOLUTIONS GUIDE
Figure 5: Features - Data & Power Adapter AC Power Connector
Table 3: AC: Power Plug
Position
A
B
C
Proprietary Redline Communications © 2014
Signal
Line (Black)
Neutral (White)
Ground (Green)
Page
14
of 24
July 9, 1014