Ras Extend Lv Features; Interface Ports; Power & Control Cable; Figure 3: Features - Data, Power & Positioner Control Cable - Redline Virtual Fiber RAS-Extend LV Installation Manuallines

RDL-3000 RAS-X LV
The RAS has multiple options for quick and easy mounting. When activated, the RAS
system automatically scans (up to 360°) and self-aligns the antenna to the best wireless
signal. Security and operational settings are negotiated automatically to bring the local
TCP/IP Ethernet plug live on the network at rates up to 100 Mbps. Continuous antenna
adjustments keep the network connection active while the system is in motion.
2.2

RAS Extend LV Features

2.2.1

Interface Ports

This section describes the port allocation on the RAS-X LV wireless terminal.
Power & Control Cable
The Power & control cable delivers DC power and position control signals to the
positioner unit. A pre-terminated cable is provided to connect the wireless terminal to the
positioner (43-pin connector).
70-00174-03-00
SOLUTIONS GUIDE
Figure 3: Features - Data, Power & Positioner Control Cable

Figure 4: Features - GPS Port

Proprietary Redline Communications © 2014 Page 13 of 24 July 9, 1014