Changing The Fuse In The Vehicle Power Cable; Removing The Device, Cradle, And Mount - Garmin nuvi 2585TV Owner's Manual

Hide thumbs Also See for nuvi 2585TV:
Table of Contents

Advertisement

2
Wipe the device dry.
Cleaning the Touchscreen
1
Use a soft, clean, lint-free cloth.
2
If necessary, use water, isopropyl alcohol, or
eyeglass lens cleaner.
3
Apply the liquid to the cloth.
4
Gently wipe the screen with the cloth.
Avoiding Theft
• Remove the device and mount from sight
when not in use.
• Remove the residue left on the windshield by
the suction cup.
• Do not keep your unit in the glove
compartment.
• Register your device at http://my.garmin.com.
Extending the Battery Life
• Keep your device away from extreme
temperatures.
• Decrease the screen brightness
• Do not leave your device in direct sunlight.
• Decrease the volume
• Disable Bluetooth
40
(page
6).
(page
6).
(page
37).
Changing the Fuse in the Vehicle
Power Cable
noTiCe
When replacing the fuse, do not lose any of the
small pieces and make sure they are put back in
the proper position. The vehicle power cable
does not work unless it is assembled correctly.
If your device does not charge in your vehicle, you
may need to replace the fuse located at the tip of
the vehicle adapter.
1
Unscrew the end piece.
TIP: You may need to use a coin to remove the
end piece.
2
Remove the end piece, the silver tip, and the
fuse.
3
Install an 2 A fast-blow fuse.
4
Place the silver tip in the end piece.
5
Screw the end piece back into the vehicle
power cable.
Removing the Device, Cradle, and
Mount
Removing the Device from the Cradle
1
Press the tab on the bottom of the cradle.
2
Tilt the device forward.
Removing the Cradle from the Mount
1
Turn the cradle to the right or left.
nüvi 2585TV Owner's Manual

Advertisement

Table of Contents
loading

Table of Contents