Bourgault 7000 Series Quick Reference Manual page 5

www.bourgault.com
f. There is a DynaCal Status window on
the Seeder Controller screen that can
be viewed at any time to see the current
calculated error. It will allow cal factor
adjustments as long as the error is above
the confidence threshold based on the
metering sample size for each tank.
1. Tank Number - lists tank and product
2. Current Calibration Number - cal
number being used to meter product
3. New Calibration Number - DynaCal
recommended cal number based of
measured weight
4. Percentage Metering Error - DynaCal
calculated rate percentage error
5. Metering Confidence Accuracy -
percentage confidence threshold based
on metering sample size, will only
alarm for errors larger than this value
6. Accept New Calibration Factor - press
to adjust cal number for any tank
7. Reset DynaCal Operation - press to
clear any errors and restart DynaCal
calculations for any tank or clear for
all tanks
1
2
3
4
5
6
7
Clear ALL
Tanks
P/N 0256-80-12
Assy P/N 0256-80-13
Weigh Scales - Quick Reference Guide
g. The default Minimum Threshold for the
alarm is set to 5% .
h. The DynaCal Average Weight Differ-
ence alarm can be disabled temporar-
ily if there are issues causing it to be
triggered falsely.
i. To disable all alarms change the
Alarm State to disabled.
ii. To disable a certain tank select
the appropriate Scale channel and
change the Rolling Average Alarm
State to disabled.
(v. 5.02 revised Jan 2023 )
Disable all
Select Scale
alarms
Channel
Disable individual
scale channel
DynaCal
Page
5