Download Print this page

Bourgault 7000 Series Start-Up Checklist

Air seeders

Hide thumbs Also See for 7000 Series:

Download this manual

7000 Series Air Seeders / 3320 PHD / 3720 ICD

Start Up Checklist

This document is available for download from the Bourgault website in PDF form,

which will include links to valuable training videos and additional reference

documents.

Go to the

Bourgault.com/Customer Service Centre

& click the PDF icon for First Time

Setup.

StartupChecklist_24March2020.docx

2020-03-24

Page 1 7000 Series Air Seeders / 3320 PHD / 3720 ICD Start Up Checklist This document is available for download from the Bourgault website in PDF form, which will include links to valuable training videos and additional reference documents. Go to the Bourgault.com/Customer Service Centre...
Page 2 7000 Series Air Seeders / 3320 PHD / 3720 ICD Note the following assumptions: • the drill and tank have been PDI’d and “Functional Tested”, • seed and fertilizer are available, • current software and firmware have been installed, • client name, farm name and all field names and products have been entered into the monitor.
Page 3 7000 Series Air Seeders / 3320 PHD / 3720 ICD Steps: (note underlined sections below are links to online resources.) Remove wing pins and unfold the drill. Return wing-lift remote to “neutral” position after drill is fully unfolded; Set-up desired...
Page 4 7000 Series Air Seeders / 3320 PHD / 3720 ICD Check the cleanout time to ensure the correct fan speeds (2-4 seconds); Turn all of the sections "off", then, one at a time, turn each section "on" and then "off" again to ensure that the correct product is coming out of the correct section(s), (do this for both the seed and the fertilizer if Dual ASC is installed).

3320 phd3720 icd