Advertisement
S
F
P E C
I L E
Wall Mount Bracket
Structural components (ET-PKC300B)
This projector mount bracket (Model No.: ET-PKC300B) is included in wall mount bracket (Model No.: ET-WBC100.)
This is a projector mount bracket (Model No.: ET-PKC300B) used to replace the projector mount bracket of an existing wall mount bracket.
Parts name
Projector mount
bracket
Screws
Projector
dropprevention kit
• Store small parts in an appropriate manner, and keep them away from children.
• Tightening torque for the screw is M4: 1.25 ± 0.2 N·m (excluding the flanged screws), M6: 4 ± 0.5 N·m.
• When tightening up the screws, use a tool such as a torque screwdriver. Do not use electric screwdrivers or impact screwdrivers.
Attention
• Dispose of the packaging materials properly after taking the product out of it.
As of February 2023
WBC100/PKC300BG_STR_T01_14/02/2023
ET-WBC100/ET-PKC300B
Form (number of parts)
Screw with captive washer (M6×16)
Screw with captive washer (M4×14)
Screw with captive washer (M6×16)
Wire rope
(3.0 mm [1/8 in] wire diameter,
750 mm [29 17/32 in] length)
Wire rope
(3.0 mm [1/8 in] wire diameter,
660 mm [25 31/32 in] length)
Flat washer (M6)
Applications
x 1
This is used to install the projector to the wall mount bracket.
These are used to secure the projector mount bracket to the
x 4
projector.
These are used to secure the connecting plate, which is removed
x 5
from the existing wall mount bracket, to the projector mount
bracket.
x 1
x 1
Prevents the projector from falling.
Use one of the two wire ropes.
x 1
x 1
TENTATIVE
3/9
Advertisement
