Numark Mixdeck Express; Installation And Setup; Looping - Serato DJ INTRO NUMARK MIXTRACK PRO Quick Start Manual

NUMARK MIXDECK
EXPRESS
8

INSTALLATION AND SETUP

The Numark MixDeck Express is a class compliant USB plug and play device and requires no further
driver installation.
1) Connect your Mixtrack Pro to an available USB port.
2) Open Serato DJ Intro.
3) You should now see both virtual decks and be ready to DJ.

LOOPING

Looping is limited to manual looping with the Numark MixDeck Express.
To make a loop, set the in point by pressing the IN button, and the out point by pressing the OUT
button. To turn the loop on or off, press the RELOOP button.
To adjust the in point of the loop, press and hold down the IN button and move the platter to expand
or contract the loop start. Release the IN button to keep this change. The same applies to adjusting
the out point by holding the OUT button and adjusting the platter.
SERATO DJ INTRO 3RD PARTY CONTROLLER QUICKSTART GUIDE 1.0