Serato DJ INTRO NUMARK MIXTRACK PRO Quick Start Manual page 11

N4 CONTROLS
1 PITCH BEND +/-
2 SYNC
3 TAP
4 SCRATCH
5 KEYLOCK
6 PITCH RANGE
7 FX 1,2,3, ON
8 PITCH FADER
9 CUE MIX
10 CUE VOLUME
11 BROWSE
12 LOAD 1, 2
13 SHIFT
14 LOOP IN/OUT/RELOOP
15 FX 1,2,3 PARAM
16 FX BEATS/MULTI
17 FX AUTO/TAP
18 BLANK
19 JOG WHEEL
20 CUE
21 PLAY/PAUSE
SERATO DJ INTRO 3RD PARTY CONTROLLER QUICKSTART GUIDE
SERATO DJ INTRO FUNCTIONALITY
Use to nudge the pitch up or down. This will slightly speed or slow down your track temporariliy.
Click Sync to match this deck's BPM value to the opposite deck.
Tap button to manually set tempo. Press enter to save to your track.
Enables scratch/scrub mode for deck. (+shift enables faster scrolling through track).
If Keylock is enabled the key of the track will remain the same regardless of the decks pitch.
Toggle between 8%/16%/50% tempo range.
Switches FX Banks 1, 2, 3 ON and OFF.
Controls the pitch of the playing deck.
Controls the mix between CUE and MASTER level in the headphone cue.
Controls headphone cue volume.
Scrolls through library and crates (press rotary knob down to switch between crates and tracks).
Loads Track to Deck 1 or 2.
Shift modifier.
Set/edit loop in/out points and enable/disable loop.
Controls parameters for DJ FX banks 1, 2, 3.
Controls the Beats Multiplier inside the FX bank.
Toggles between track BPM and manual TAP BPM for FX.
Toggles between Time Elapsed and Time Remaining.
Touch the top of the platter to scratch or pitch bend. Moving the outside of the wheel will bend pitch of your track.
Set a temporary cue for the loaded track.
Plays/Pauses virtual deck.
1.0
11