Vestax Typhoon; Installation And Setup; Looping; Filter - Serato DJ INTRO NUMARK MIXTRACK PRO Quick Start Manual

INSTALLATION AND SETUP

The Vestax Typhoon is a class compliant USB plug and play device and requires no further driver

VESTAX TYPHOON

installation.
1) Connect your Typhoon to an available USB port.
2) Open Serato DJ Intro.
3) You should now see both virtual decks and be ready to DJ.

LOOPING

Auto-looping allows you to create loops instantly. Auto-looping range from 1 to 8 bars. You can use
the relevant Loop Set controls on your hardware to select the auto-looping range.
Pressing auto-looping again while auto-looping is active will deactivate the loop.
NOTE: Auto-looping calculates the loop from the track's BPM value, so make sure your tracks
have been analyzed prior to Auto-looping.

FILTER

The Typhoon's platter can be switched to control a HP/LP filter. To initiate this, press the FILTER
button. You will now be able to control a High Pass filter by turning the jog wheel to the left, and a Low
Pass filter by turning the jog wheel to the right.
12
SERATO DJ INTRO 3RD PARTY CONTROLLER QUICKSTART GUIDE 1.0