Maintenance; Fuse Replacement - SMC Networks LOOPANTNVIS3 Operator's Manual

Maintenance


Check the condition of the connectors and cables every 14 days. Replace
where necessary.

Check all fixings and hardware every 14 days. Ensure the Folding Loop
Antenna is securely mounted to the vehicle. Tighten fixings or Replace
where necessary.

Fuse Replacement

To replace the internal Fuse inside the Electrical Enclosure, proceed as
follows.
Isolate DC power and RF power to the Folding Loop
Antenna
1. Ensure DC Power and RF Power has been Isolate
2. Unscrew the 4 captive screws on the Enclosure Lid
3. Remove the Enclosure Lid
4. Remove the Fuse Cover
5. Remove the Fuse and replace
Current Rating
Length
Diameter
6. Replace the Enclosure Lid and secure the screws
Issue 1
2A
32mm
6.3mm
14