Table of Contents
Advertisement
How to M ount the Infrared Address Transmitter
(continued from page 9)
An Example of the "Pointing" M ethod.
7 Installation position
• Position the transm itter close to the picture that w ill be explained.
• For large size pictures, it is recom m ended that the visitor be adequately inform ed as to w here the Portable
ROM Player should be pointed.
Exam ple : Instructions for the visitor, such as " Please Point the Portable ROM Player at the nam e of the
picture and press
7 Adjusting the Angle of the Transmitter
Exhibit w all
10
Downloaded from:
https://www.usersmanualguide.com/
" can be printed on a card and placed on the transm itter.
PLAY
Within a range of 2.5 - 3 meters (8.2 - 9.8 ft)
from the ceiling, the transmitter should sit at a
5° angle in a dow nw ard direction from the
exhibit w all.
In this range the transmitter can be
basically parallel w ith the w all.
Within a range of 0 - 0.5 meters (0 - 1.6 ft) from the floor, the transmitter should
sit at a 5° angle in an upw ard direction from the exhibit w all.
Ceiling railing
Pow er outlet or a ceiling outlet w ith a safety plug
(sold separately)
• The pow er adaptor is inserted and then
Turn the
secured by turning. This prevents the
adaptor
adaptor from falling.
Optical transmission lens
• When explanation cards are attached to the
transm itter, take precautions not to cover the
optical transm ission lens.
• As illustrated in the diagram
below the transmitter should be
positioned so the sw itches and
jacks are either up or dow n
w hen directly facing the unit.
Advertisement
Table of Contents
