1. Manuals
  2. Brands
  3. Traxon Technologies Manuals
  4. Lighting Equipment
  5. e:cue SYMPL Core Sp
  6. Information for use

Traxon Technologies e:cue SYMPL Core Sp Information For Use

Hide thumbs
Table of Contents

Advertisement

Quick Links

Read the Information for Use and the Safety Instructions
carefully. Subject to modification without prior notice.
Typographical and other errors do not justify any claim for
damages. Modification of the product is prohibited.
This document is designed for electricians, system
administrators, and product users.
All product names and trademarks mentioned in this manual are
trademarks of their respective owners.
Except for internal use, relinquishment of the instructions to a
third party, duplication in any type or form - also extracts - as
well as exploitation and / or communication of the contents is not
permitted.
Downloads and more information at:
www.ecue.com
e:cue SYMPL Core Sp
Information for Use
Edition:
07.03.23 [EN_SYMPL_CoreSp_Setup_v2p0]
Published by:
Traxon Technologies Europe GmbH
Karl-Schurz-Strasse 38
33100 Paderborn, Germany
©2023 Traxon Technologies Europe GmbH
All rights reserved
Traxon Technologies Europe GmbH
Sales Operations
Karl-Schurz-Str. 38
33100 Paderborn, Germany
+49 5251 54648-0
support@ecue.com
AM430280035

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the e:cue SYMPL Core Sp and is the answer not in the manual?

Questions and answers

Related Manuals for Traxon Technologies e:cue SYMPL Core Sp

Summary of Contents for Traxon Technologies e:cue SYMPL Core Sp

  • Page 1 AM430280035 e:cue SYMPL Core Sp Information for Use Edition: Read the Information for Use and the Safety Instructions 07.03.23 [EN_SYMPL_CoreSp_Setup_v2p0] carefully. Subject to modification without prior notice. Typographical and other errors do not justify any claim for Published by: damages. Modification of the product is prohibited.
  • Page 2 Update with a USB flash drive (from v5.2 or newer) Update with a USB flash drive (from older version than v5.2) Update via microSD card (from any version) Dismounting Certifications Dimensions WWW.TRAXON-ECUE.COM ©2023 traxon technologies. All rights reserved. Information for Use 03/23 Sheet: 02 / 20...

  • Page 3: Safety Instructions

    SYMPHOLIGHT. Connections between servers, Cores and Nodes are always made with e:net via Ethernet. e:cue SYMPL Core Sp is a stand-alone engine for e:cue SYMPHOLIGHT with SYMPL Nodes as interfaces. It executes SYMPHOLIGHT proejects in small to medium-sized projects and controls all available SYMPL Nodes.
  • Page 4 SYMPL Core Sp — Information for Use | General device description System overview  content Delivery content Delivery content for the e:cue SYMPL Core Sp (AM430280035): e:cue SYMPL Core Sp Safety instructions Welcome note WWW.TRAXON-ECUE.COM ©2023 traxon technologies. All rights reserved.
  • Page 5 Ethernet link LED (e:net, LAN activity) Power LED Identify button micro SD card slot Power supply (V–, V+ left to right) e:net / Ethernet DIN rail handle USB 2.0 socket WWW.TRAXON-ECUE.COM ©2023 traxon technologies. All rights reserved. Information for Use 03/23 Sheet: 05 / 20...

  • Page 6: General Remarks

    (from older version than v5.2)“ on page 13 for further information. General remarks Transport Only transport the device in its original packaging. This protects the device from damage. WWW.TRAXON-ECUE.COM ©2023 traxon technologies. All rights reserved. Information for Use 03/23 Sheet: 06 / 20...

  • Page 7: Installation

    | Installation Unpacking Only unpack the e:cue SYMPL Core Sp at its installation location. To protect the device against condensation water, unpack it and wait until all moisture remaining in the device has evaporated. Condensation can occur when the device is moved from a cold to a warm location. Keep the packaging for use in case of further transport.
  • Page 8 Gentle pressure is then applied to the top front to snap it in place. The SYMPL Core Sp has been mounted successfully. You can also mount the e:cue SYMPL Core Sp on any flat vertical surface. Use a 3 to 3.5 mm screw for the hanger hole.

  • Page 9: Network Configuration

    Define the Network Mode (DHCP settings), the IP address, and the subnet mask to your needs: Enter the password for the SYMPL Core Sp and click “Apply” to submit the changes. WWW.TRAXON-ECUE.COM ©2023 traxon technologies. All rights reserved. Information for Use 03/23...
  • Page 10 Restart via power disconnection should be the exception. The device is designed for continuous operation. Frequent disconnection may cause the internal clock to become misaligned and the SD card to become damaged. WWW.TRAXON-ECUE.COM ©2023 traxon technologies. All rights reserved. Information for Use 03/23 Sheet: 10 / 20...

  • Page 11: Firmware Update

    SYMPL Core Sp — Information for Use | Firmware Update Firmware Update The e:cue SYMPL Core Sp runs on an integrated firmware. The firmware is a specific SYMPHOLIGHT application. It is recommended to update the firmware whenever a newer version is available.
  • Page 12 Connect the USB flash drive to the computer. Download the new update ZIP file from www.ecue.com to the computer. The update ZIP file contains the new firmware. Unzip the update file. WWW.TRAXON-ECUE.COM ©2023 traxon technologies. All rights reserved. Information for Use 03/23 Sheet: 12 / 20...
  • Page 13 Update with a USB flash drive (from older version than v5.2) Update a SYMPL Core S using a USB flash drive. This update way applies to devices with an installed SYMPHOLIGHT version v5.1SR1 or older. WWW.TRAXON-ECUE.COM ©2023 traxon technologies. All rights reserved. Information for Use 03/23 Sheet: 13 / 20...
  • Page 14 The update ZIP file contains the new firmware. Unzip the update file. Copy all unzipped files to the root directory of the USB flash drive. WWW.TRAXON-ECUE.COM ©2023 traxon technologies. All rights reserved. Information for Use 03/23 Sheet: 14 / 20...
  • Page 15 The downloaded project file and screenshots (see information above). To restore the previous configuration: Make sure the computer is connected to the same network as the SYMPL Core S. WWW.TRAXON-ECUE.COM ©2023 traxon technologies. All rights reserved. Information for Use 03/23 Sheet: 15 / 20...
  • Page 16 To unplug the SD card of the Core Sp, the card must be pulled, there is no ejection mechanism. Insert the card into the microSD card reader of the computer. WWW.TRAXON-ECUE.COM ©2023 traxon technologies. All rights reserved. Information for Use 03/23 Sheet: 16 / 20...
  • Page 17 When using a statically configured network (i.e. one without an external DHCP server), you can now configure the SYMPL Core Sp network settings. Remember to reconfigure the computer network settings again, where applicable. WWW.TRAXON-ECUE.COM ©2023 traxon technologies. All rights reserved. Information for Use 03/23 Sheet: 17 / 20...
  • Page 18 (ESD protection). Disconnect all attached cables. Dismount the e:cue SYMPL Core Sp from the rail by pulling the black DIN rail handle and unhitching the SYMPL Core Sp. The dismounting is completed.
  • Page 19 —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help.  content WWW.TRAXON-ECUE.COM ©2023 traxon technologies. All rights reserved. Information for Use 03/23 Sheet: 19 / 20...
  • Page 20 Dimensions All dimensions in mm 62,0 71,3 90,5 99,7 Please check for the latest updates and changes on the Traxon website. © 2023 TRAXON TECHNOLOGIES. ALL RIGHTS RESERVED. www.traxon-ecue.com...

This manual is also suitable for:

Am430280035

Table of Contents