Memory Expansion Connector - Epson Equity I User Manual

You install a memory option card the same way you install other
option cards. Installing an option card is described at the beginning of
this chapter. The procedure to install the Epson 256K expansion card is as
follows:
1. Remove the main unit cover as described earlier in this chapter.
2. The memory expansion connector is located at the front of the main
unit, to the left of the disk drives, as shown in Figure 5-6.
Figure 5-6. Memory expansion connector
Unpack the memory card. Hold it by the top corners with the com-
3.
ponent side to the right (facing the disk drive units).
Lower the card into position and push it firmly into the socket on the
4.
main circuit board. Be careful to align the connector correctly, and
do not force it into place. The card is held in position by the piece of
foam inside the cover of the main unit.
Replace the cover of the computer as previously described and
5.
reconnect the system.
Memory expansion
connector
1
37