Removing Option Cards - Epson Apex User Manual

Removing Option Cards

If you find that you need to remove an option card,
first turn off the computer and unplug the power cord,
then detach any cable connected to the card.
Disconnect the monitor and keyboard, and remove
the main unit cover. Then refer to the option card
installation instructions and follow them in reverse.
Be sure to follow all the same safety instructions you
did while installing the card, and make sure you pull
the card straight up and out of the connector to avoid
damaging it. When the card is removed, rewrap it
(preferably with the original packing materials) and
place it inside the packing box for safe storage. Next,
replace the metal access slot cover, and finally replace
the computer's cover.
When you have reassembled the unit, remember that
you may need to reset DIP switches to properly
configure your system.
Installing Option Cards
5-9