Panasonic CU-2E18NBU Service Manual page 33

16.1.3 Removing the Control P.C. Board
6 Remove the drip proof cover.
7 Disconnect the connectors (lead wires of the
compressor, sensor, and others).
8 Remove the screw at the right side of the
control box, and pull out the entire control box.
9 Release the control P.C. Board tab to remove
the control P.C. Board.
16.1.4 Removing the Propeller Fan and Fan Motor
1 Follow the steps in 16.1.1 for removing the
cabinet top plate and cabinet front plate.
2 Remove the propeller fan by removing the nut
turning clockwise at its center.
33