Operating procedures differ depending on the computer operating system you are
using. Refer to the section that applies to your system (see below).
● IBM PC/AT Windows 98/98SE/2000/Me ................................. Page 10 – 14
● Macintosh
ATTENTION:
• This unit may not operate correctly when connected to a USB hub or a PC with a
built-in USB hub (more than one USB connector). If possible, always connect this
unit directly to your computer.
• When the same memory card is used in both Mac OS and Windows, the card's
memory capacity may not be displayed correctly, or an error message may be
displayed while a file is being written.
In this case, it is recommended that you do not use the same card in both
systems and that you format the card with the OS you are going to use it with.
Downloaded from:
Mac OS 8.6 or later ............................................... Page 15 – 20
https://www.usersmanualguide.com/
OPERATION
9
Need help?
Do you have a question about the HC-CW1F and is the answer not in the manual?
Questions and answers