Table of Contents
Advertisement
Windows 98/98SE/2000/Me
Before you can use this unit with your PC, you must first install the driver software.
Perform the following installation before connecting this unit to the PC.
1. Close all open applications.
2. Insert the provided USB driver CD-
ROM into your PC's CD-ROM drive.
3. The installation software will start up
automatically in a few seconds. If it
does not start up, try one of the
following.
Method 1
• Click the [START] button and select
[RUN] from the displayed menu.
• Enter (CD-ROM drive name):
\SETUP.EXE in the displayed dialog
box. (e.g.: D: \SETUP.EXE)
• Click the [OK] button.
Method 2
• Double-click [My Computer].
• Double-click the CD-ROM icon.
• The installation software starts up.
If it does not start up and the CD-
ROM window opens, double-click
[SETUP.EXE].
4. When the installation software starts
up, the operation in Fig. 1 is
performed and then the window in
Fig. 2 is displayed.
In Fig. 2, click [Next]. To stop
installation, click [Cancel].
5. In Fig. 2, click [Next] to start
installation of the driver software
(Fig. 3).
6. When the installation is complete, the
window in Fig. 4 is shown. To activate
the installed driver software, restart
the PC. Select [Yes] and click
[Finish] to restart the PC
automatically. To restart after closing
the installation software, select [No]
and click [Finish]. In this case, do not
connect this unit to the PC until
restarting the PC.
10
Downloaded from:
SOFTWARE INSTALLATION
https://www.usersmanualguide.com/
Fig. 1
Fig. 2
Fig. 3
Fig. 4
Advertisement
Table of Contents
