Epson P-2000 Basic Manual page 56

Using the AC Adapter
Use only the type of power source indicated on the AC adapter's
label, and always supply power directly from a standard, domestic
power outlet with a power cord that meets the relevant local safety
standards.
Place the AC adapter near an electrical outlet where the power
cord can be easily unplugged.
The AC adapter is designed for use and provided with this
product. Do not attempt to use it with other electronic devices
unless specified.
Do not remove the AC adapter from this device during operations.
The AC adapter included is designed for use with this product.
Use of any other adapter could result in fire, electrical shock, or
injury.
Use only adapter model A351H with the P-2000.
Do not connect the AC adapter when the battery is not installed.
Otherwise, the P-2000 may be damaged.
Use only the power source that meets the power requirements
indicated on the label attached to the product. If you are not sure
of the power supply specifications in your area, contact your local
power company or regulatory agency.
Make sure the total amperage of all devices plugged into the power
outlet does not exceed the power outlet's ampere rating.
Do not use a damaged or frayed AC adapter.
If you use an extension cord with this product, make sure the total
amperage of all devices plugged into the extension cord does not
exceed the cord's amperage rating.
Never disassemble, modify, or attempt to repair the AC adapter by
yourself.
Do not use power outlets controlled by wall switches or automatic
timers.
Do not use power outlets on the same circuit as large motors or
other appliances that may cause voltage fluctuations.
56