DANLERS SILVAIR MESH-HBWD DALI Quick Start Manual

MESH-HBWD DALI
Ceiling High Bay (Wide) Passive Infra Red (PIR)
Occupancy Detector & Photocell for DALI ballasts
Input: 100-240 Vac 50/60Hz
PLEASE READ THESE INSTRUCTIONS BEFORE INSTALLING THE PRODUCT
NOTE: MESH- HBWD DALI is compatible with any qualifi ed Bluetooth mesh components and commissioning tools.
We recommend Silvair Commissioning as a reliable solution.
This MESH-HBWD DALI High Bay (Wide Detection)
Lighting Control can be mounted directly onto
solid ceilings or onto a range of different mounting
boxes. Confi gurable for any room occupancy style,
via the Silvair Platform (App and Web).
INSTALLATION
To be installed by a competent person with
reference to BS 7671 or equivalent local standards.
If in doubt consult a qualifi ed electrician.
• Plan where the MESH-HBWD DALI is to be
located (see diagram 1). Switch off supply and
check for hidden cables and pipes.
• The MESH-HBWD DALI should be connected as
shown in diagrams 2 and 3:
L Live in.
N Neutral in.
+
DALI control line (polarity independant)
-
DALI control line (polarity independant)
• Knockout or drill the approprdiate holes on the
mounting plate for attaching the plate to the ceiling
or back box (if applicable). Feed cables through
the appropriate (side or rear) entry hole. Screw the
back mounting plate to the ceiling or back box
via the mounting holes. Wire the cables into the
sensor head block terminal. Push the sensor head
onto the mounting plate and align the side clips
with the slots on the sensor heads.
OPERATION
To check the operation of the MESH-HBWD DALI:
• Turn on the supply then after 20 seconds if the
sensor has recognised movement of a person
within its zone of detection the integral red LED
on MESH-HBWD DALI will stay illuminated for 4
seconds before the red LED turns off.
• Thereafter, every time movement is detected by
MESH-HBWD DALI the integral red LED will stay
illuminated for 4 seconds.
The control also features adjustable time out (time
lag) control and daylight threshold control which
are confi gured by the Silvair APP.
PRECAUTIONS
• Do not place the MESH-HBWD DALI near heat
sources, fans or in ventilated ceiling voids.
• MESH-HBWD DALI can be wired in parallel
(sharing the same Live and Neutral).
• Do not place close to, or positioned such
that, any light source points directly into the
MESH-HBWD DALI.
• Ensure wires and cables are securely held within
the connection terminals.
• The MESH-HBWD DALI should be protected by
a 5 or 6 Ampere mcb or fuse.
• Disconnect the MESH-HBWD DALI from the
circuit before performing insulation testing
of the wiring circuit.
DANLERS Limited, Vincients Road, CHIPPENHAM, Wiltshire, SN14 6NQ, UK.
Telephone: +44 (0)1249 443377 Fax: +44 (0)1249 443388 E-mail: sales@danlers.co.uk
www.danlers.co.uk
Company Registered Number 2570169 VAT Registration Number 543 5491 38
23/08/19
TECHNICAL DETAILS
INPUT
Voltage: 100 - 240Vac
Frequency: 50/60Hz
Max. mains current: 20mA
Standby current: 18mA
OUTPUT
Output: DALI
16mA
Output Current:
(maximum 8 ballasts)
RADIO TRANSCEIVER
Operating frequencies: 2.4... 2,483 GHz
Max. output power: +4 dBm
LUX PARAMETERS
Range: 5 - 2000 lux
OPERATING CONDITIONS
Note: The temperature difference between the
detection target and the background must be at
least 4 °C.
-20... +40 °C (lout
Ambient temperature:
20mA)
Storage temperature: -25... +75 °C
Max. relative humidity: 0... 80%, non cond.
CONNECTORS
Terminal block 0.5mm
Wire size: or stranded
Wire strip length: 6-7mm
Tightening torque: 0,4 Nm/4 Kgf.cm
MECHANICAL DATA
Dimensions: 63mm x 91mm x 91mm
Weight: 105g (unpacked)
Degree of protection: IP20
Protection class: Built-in Class 2
Flame-retardant
Material (casing)
polycarbonate
Finish / Colour Matt /White (RAL 9003)
Protection class: Built-in Class 2
CONFORMITY AND STANDARDS
EMC emission:
EN 301 489-1 V2.2.0, EN 301 489-17 V3.1.1,
EN 55032: 2015, EN61000-3-2: 2014,
EN61000-3-3: 2013
EMC immunity:
EN 301 489-1 V2.2.0, EN 301 489-17 V3.1.1
Environment:
Complies with WEEE and RoHS directives
Suggested typical wiring
+
-
N
L
5A or 6A MCB
- 2.5mm solid
2 2
L
N
MESH-HBxx DALI
plan
5 YEAR WARRANTY
MESH-HBWD DALI comes with a
5 year warranty from the date of
manufacture and is CE marked.
INS439 MESH-HBWD DALI (Issue 01)
Mounting height
up to 14m
Perspective view -
ceiling mounted
Up to
28m diameter
DIAGRAM 1
+
-
N
L
or fuse
DIAGRAM 2
Ballast Ballast
DALI
Control Lines
DIAGRAM 3
side
90
90
76
DIAGRAM 4
63