Advertisement
Setup
FOR FIRMWARE VERSION 2.0+
This can occur if the battery in the Extender runs down or if the signal is blocked between the Extender and the
continuously. The ACR OLAS mobile app will alert and warn
that the Extender has become disconnected. The tracking
system automatically enters paused state.
2.
To silence the alarm either accept the alert on the mobile app
Extender
Disconnect
1234
Tracking Paused
MOB
Paused state. This can be done either by pressing the control
switch once on the Core/Guardian or using the ACR OLAS
app.
Any ACR OLAS transmitters that were being tracked by the
Extender will need to be back within range of the
Core/Guardian to prevent the MOB alarm from being
triggered.
Unintended Extender disconnects
Core/Guardian.
Extender
Disconnect
1234
Extender Signal Lost
Pause ACR OLAS Tracking?
OK
MOB
www.acrolas.com
Extender
Disconnect
1234
Extender Signal Lost
Pause ACR OLAS Tracking?
OK
MOB
or press the control switch once on the Core/Guardian.
3.
Tracking can be resumed without the Extender by exiting
Advertisement
