Plug And Play Capability - Dell E228WFP User Manual

Documentation
Pin Signal Assignment Pin Signal Assignment
1 T.M.D.S. Data 2- 9 T.M.D.S. Data 1-
2 T.M.D.S. Data 2+ 10 T.M.D.S. Data 1+
3 T.M.D.S. Data 2 Shield 11 T.M.D.S. Data 1 Shield 19
4 No Pin 12 No Pin
5 No Pin 13 No Pin
6 DDC Clock 14 +5V Power
7 DDC Data 15 Ground (for +5V)
8 No Connect 16 Hot Plug Detect

Plug and Play Capability

You can install the monitor in any Plug and Play-compatible system. The monitor automatically provides the computer system with its Extended Display Identification Data (EDID) using Display Data Channel (DDC) protocols so that the system can configure itself and optimize the
monitor settings. If desired, you can select different settings, but in most cases monitor installation is automatic.
General
Model number
Screen type
Screen dimensions
Preset display area:
Horizontal
Vertical
Pixel pitch
Viewing angle
Luminance output
Contrast ratio
Faceplate coating
Backlight
Response Time
Resolution
Horizontal scan range
http://support.dell.com/support/edocs/monitors/E228WFP/En/about.htm (5 of 8)8/28/2007 8:59:03 AM
Pin Signal Assignment
17 T.M.D.S. Data 0-
18 T.M.D.S. Data 0+
T.M.D.S. Data 0 Shield
20 No Pin
21 No Pin
22 T.M.D.S. Clock Shield
23 T.M.D.S. Clock +
24 T.M.D.S. Clock -
E228WFP
Active matrix - TFT LCD
22 inches (22-inch viewable image size)
473.76 mm (18.65 inches)
296.1 mm (11.66 inches)
0.282 mm
160 (vertical) typ, 160 (horizontal) typ
300 CD/m (typ)
800 to 1 (typ)
Antiglare with hard-coating 3H
CCFL edgelight system
5ms typical
30 kHz to 83 kHz (automatic)