Advertisement
ACCU-SCOPE
LED FLUORESCENCE ILLUMINATOR
73 Mall Drive, Commack, NY 11725 • 631-864-1000 • www.accu-scope.com
5. Place the LED fluorescence illuminator on the
top of the microscope frame. Align the
bottom dovetail of the illuminator to the
dovetail receiver on the frame. If the
dovetail does not fully enter the receiver, you
may need to loosen the set screw some
more.
6. When aligned, tighten the set screw on the
microscope frame to secure the illuminator
to the frame.
7. With the provided hex screwdriver, loosen
the viewing head set screw.
If the set screw is not already in place on the
viewing head dovetail receiver, use the
provided hex wrench to thread the provided
set screw into the front of the hole for the
viewing head dovetail receiver.
6
Advertisement
