Advertisement
Technical design
Position and function of the connections, operating and display elements
7
Fig. 2: Position and function of the connections and labeling, operating and display elements
Pos. Connection, operating or display
element
1 Connection pins for KNX bus terminal
block
2 Programming button
3 Programming LED (red)
4 Label with barcode of the device
5 Labeling of the connection terminals
6 Connection terminals
7 Label field
8
Smart Infrastructure
GAMMA Instabus
1
2
3
Function
Connect KNX bus.
Short push of button (< 2 s):
●
Activate programming mode, display status (programming
LED on = active)
Very long push of button (> 20 s):
●
Reset to factory settings (programming LED starts flashing
after 20 s)
Two copies of the barcode are printed on it. The second
barcode can be separated to facilitate commissioning and, for
example, be kept with the documents for the project.
Connect input and loads.
Enter the physical address.
4
5
6
A6V13488292_en--_a
2023-02-22
Advertisement
