SMARTBOT Robust 2800 Instruction Manual page 8

Auto-Flo Instructions
Normal straight status:
Smartbot's US patented Auto-Flo system
has industry-leading liquid-sensing
technology that can detect as little as 2" of
floodwater. Once the water is detected,
Smartbot automatically activates to pump
the water out. When the water level
reaches approximately 1/16" above the
surface, Smartbot safely turns itself off.
Note: Removing water level depends on
many factors. Only on a levelled surface
can water be removed to a depth of
approximately 1/16".
Knock-over status:
The pump stops working automatically if it
topples over and the water level is lower
than the impeller. This happens because
of its skilled and scientific design.
06
2" Auto On
1/16" Auto Off
5-1/2" Auto Off