Safety Signal Words - SMARTBOT Robust 2800 Instruction Manual

Submersible utility pump
Table of Contents

Advertisement

Only people well acquainted with these rules of
safe operation should be allowed to use the unit.
Keep away from children!

Safety Signal Words

DANGER
Indicates an imminently
hazardous situation which, if NOT avoided, WILL
result in death or serious injury.
WARNING
Indicates a potentially
hazardous situation which, if NOT avoided, could
result in death or serious injury.
CAUTION
Indicates a potentially
hazardous situation which, if NOT avoided, MAY
result in minor or moderate injury.
NOTICE
Indicates important information,
that if NOT followed, MAY cause damage to
equipment.
DANGER
This pump is NOT rated for use with flammable /
combustible liquids, vapors, or dust. The pump
should be used to pump clear water ONLY. Failure to
follow these instructions WILL result in bodily injury
or death.
Electric shock hazard! GFCI receptacles will provide
protection against line-to-ground faults only. The
ground fault receptacle does NOT limit the magnitude
of a fault current and will NOT prevent an electric
shock.
DO NOT use pump if any part of the housing switch
or probe is cracked, broken, or missing.
Always disconnect electrical supply before
attempting to install, service, relocate, or perform any
maintenance. Failure to do so WILL result in fatal
electric shock!
Electric shock hazard! Use only Underwriters
Laboratories (UL)- listed extension cord with #16
gauge or larger wire that is labeled for outdoor use.
Use polarized grounding-type plugs only.
DO NOT attempt to service or open this product
while it is connected to an electrical power supply.
Do NOT destroy and cut off the power cord for wiring,
otherwise, you will be electrocuted.
WARNING
Electrical connections must be moved to higher
ground in order to reduce risk of flooding.
If using an extension cord, do NOT allow pump
cord/extension cord connection to fall into pool or
come in contact with water. Pump/extension cord
connection must be kept dry and away from moisture.
DO NOT handle plug connector near water.
DANGER � WARNING � CAUTION � NOTICE
DO NOT use the power cord or discharge hose to
carry or handle the pump. Doing so may cause
damage to either the power cord or discharge hose.
Use the carrying handle supplied with the pump.
Never touch any electrical device, including this
pump, while it is touching water, in water, or while in a
moist environment. Always unplug the unit while
performing maintenance or installing items.
If the water contains caustic chemicals, highly chlorinated
water, and/or foreign materials, the pump cannot be
applied in these circumstances.
Always use a grounded outlet to attach the plug. A
three-pronged outlet must be used for safety
purposes. This should be in accordance with the
National Electric Code and any additional codes
required by law.
This unit is NOT designed for use as a sump pump or
for sump applications. It is also NOT designed for use
in septic tanks or underground vaults to pump raw
sewage or effluents. This can never be used with
hazardous materials or in explosive locations.
For safety reasons, it is recommended to use sockets
with leakage protection, especially in humid
environments. The leakage protection device used
should have the appropriate UL safety certification.
DO NOT attempt to service or open this product while
it is connected to an electrical power supply.
DO NOT use this product to pump chemicals or
corrosive liquids, damage to seals and moving parts
will result.
DO NOT lift this product by the electrical power cord.
CAUTION
Check for damaged parts before each use. Carefully
check that the pump is operating and performing it's
intended functions. Replace damaged or worn parts
immediately. Never operate the pump if anything is
damaged, not working properly.
Never install a shutoff valve in the suction or discharge of
this pump. This will cause excessive friction loss and will
damage the pump. It will also void the warranty.
All connections must be air-tight. A single leak will
prevent proper operation of the pump and may cause the
pump to run dry. If the pump runs dry, this will void the
warranty.
DO NOT run the pump with the outlet closed or blocked.
The excessive pressure will cause the pump to explode
and cause injury or death.
DO NOT pump water that is hotter than 95° F.
DO NOT let water inside pump freeze or let frost build up
on pump.
NOTICE
Before attaching hoses to the inlet and outlet, wrap the
threads of hose with PTFE tape.
01

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Robust 2800 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

This manual is also suitable for:

Super 3600

Table of Contents