Epson BrightLink 475Wi Start Here Manual page 3

2 Make Sure the Software Is Installed
You may already have the software on your computer, or
you may need to install it yourself. For Mac OS
need Easy Interactive Driver and Easy Interactive Tools.
For Windows, you only need Easy Interactive Tools.
Here's how to find out if the software is installed on your
computer:
If you are using a Mac:
Look for the Easy Interactive Driver and Easy Interactive
Tools folders in the Application folder on your hard drive.
If you see these folders, the software is installed.
If you are using Windows:
Select or Start > All Programs or Programs >
EPSON Projector > Easy Interactive Tools Ver. 2.00. If
you see Easy Interactive Tools Ver. 2.00, the software is
installed.
If the software is not installed, follow the steps in the next
column to install it.
If you need to install the software
X, you
®
Do one of the following:
•
Use the CD that came with the projector, labeled
"EPSON Projector Software for Easy Interactive
Function"
•
Download the most up-to-date version from:
epson.com/brightlinkdownloads (U.S.)
epson.ca/brightlinkdownloads (Canada)
For more information about Easy Interactive Tools, see
the Easy Interactive Tools Tips sheet in this Welcome
Kit or the BrightLink User's Guide.
You can also install TeamBoard Draw, an intermediate
level annotation program, from the CD that came with the
projector.
For more information, see the TeamBoard Draw Tips
sheet in this Welcome Kit or the TeamBoard videos at
epson.com/brightlink (U.S.) or epson.ca/brightlink
(Canada).