Solving Problems; Problems And Solutions - Epson BrightLink 450Wi Quick Manual

Solving Problems

If you have a problem with your projector, you can press the
remote control to help solve it.
You can also check the following section for basic troubleshooting suggestions, or
see the on-screen User's Guide for more detailed help.
Note:
If any of the lights on the projector turn red, this indicates a problem with the lamp,
temperature, or other aspect of the projector. See your on-screen User's Guide for
more information.

Problems and Solutions

Problems Displaying Your Computer Screen
■
Check that the Ppower light is green and not flashing. The projector may be
in standby or sleep mode. If the Ppower light is orange, press the Ppower
button to turn the projector on. Also press the
remote control to make sure the picture has not been turned off temporarily.
■
The attached computer may be in sleep mode or displaying a black screen
saver. Try pressing a key on the computer.
■
If more than one computer or one or more video sources are connected, you
may need to press the
Allow a few seconds for the projector to sync up after pressing the button.
■
If you don't see the whole screen, press the
control. Or, press the
option (on the Signal menu) is set to
Resolution
■
If you see a
No Signal
Hold down the
you display on an external monitor. It may have an icon such as
may be labelled
pressing it.
Source Search
button and try various settings. Make sure the
Aspect
message and you're using a PC notebook:
key on the keyboard and press the function key that lets
Fn
. You may need to hold down the
CRT/LCD
? Help
A/V Mute
button to select the correct source.
button on the remote
Auto
.
Auto
Problems and Solutions
button on the
button on the
, or it
key while
Fn
27