Filter Saturation Indicator; Checking The Filter Saturation Indicator - Miele DAS 4940 Operating And Installation Instructions

Special instructions for glass
surfaces
 Glass surfaces can be cleaned using
a cleaner specifically for use on glass.
 You can clean the rear section of the
deflector plate from the inside.
Remove the grease filters to do this.
Cleaning and care

Filter saturation indicator

The ventilation hood registers the length
of time it has been operated.
Filter saturation indicators show when
the filters need to be cleaned or
changed by lighting up the grease filter
symbol  or charcoal filter symbol .
You can set the filter saturation
indicator to suit the type of cooking you
do (see "Changing settings").
Checking the filter saturation
indicator
Before the set operating time has run
out, you can check what percentage of
the time has elapsed.
 Press the On/Off control  to turn the
blower on.
 Press and hold the filter saturation
indicator .
- Once, to check the grease filter
operating time. The grease filter
symbol  lights up.
- Twice, to check the charcoal filter
operating time. The charcoal filter
symbol  lights up.
One or more of the blower power level
indicators will flash simultaneously.
The number of flashing indicators
shows the elapsed operating time as a
percentage.
Indicator 1 .................................... 25%
Indicators 1 and 2 ......................... 50%
Indicators 1 to 3 ........................... 75%
Indicators 1 to B ......................... 100%
35