Table of Contents
Advertisement
Open the battery compartment
1. Use the supplied screwdriver to remove the screw at the bottom of the handle and pull out the
battery compartment.
2. Open the battery compartment by lifting the cover carefully.
3. Replace the 2 supplied batteries, observe correct polarity.
4. Close the cover of the battery compartment. Make sure that the two small hooks at the top inside of
the cover hook into the two small slots inside at the top of the battery compartment.
5. Reinstall the battery compartment and tighten the screw.
Charging the batteries
Insert the 2 Li-ion batteries into the supplied battery charger. Pay attention to correct polarity.
Plug the charger into a standard wall outlet.
The charging is finished when the 2 indicator lights at the top of the charger turns green. Charging
time to reach full charge needs approx. 7 hours. The fully charged battery can continuously works
up to 8 hours.
Note: Do not mix old and new batteries. Do not mix alkaline standard (carbon-zinc) and
rechargeable (nickel cadmium) batteries.
Never dispose of the device or used batteries/rechargeable batteries in
household waste. The user is obligated to take end-of-life devices to a
designated collection point for the disposal of electrical and electronic
equipment. And consumers are legally required to take used batteries
to appropriate collection sites, the retail store where the batteries were
purchased, or wherever batteries are sold.
3
Advertisement
Table of Contents
