Titan TTS-NP Series User Manual page 13

Cleaning distal end
Hold the rigid portion of the distal end and use a clean soft piece of gauze, cloth or a cotton swab to
wipe off dirt and liquids. The best results may obtained by using commercially available absolute
ethanol.
Cleaning main unit
Moisten a soft, clean cloth with clean water and wipe for cleaning the main unit. Finally dry it with
a clean dry cloth.
Storage
 Store the instrument at normal room temperature and air humidity.
 Straighten the angulation section when you place it into the carry case.
 Store the equipment at a clean, dry and frost-protected place.
13