Attaching The Power Cord; Setting The Paper Feed Mechanism - Epson ActionLaser User Manual

Attaching the power cord

1. Before attaching the power cord, make sure that the power
switch on the left side of the printer is turned off. (It is off when
side of
the O
2. Attach power cord to the socket at
the
shown below. Then plug the other end of the power cord into a
properly grounded outlet.
N o t e : D o n o t c o n n e c t t h e t o y o u r c o m p u t e r u n t i l t h e n e x t
c h a p t e r .

Setting the paper feed mechanism

Follow the steps below if you are using the printer for
or if you have just transported the printer:
1. Be sure the printer is turned off; then remove the paper cassette.
2. Turn on the power by pressing the side of the power switch
marked with the vertical bar. The power indicator lights and a
PAPER EMPTY
switch is pushed down.)
the
message appears.
Assembling the Printer
back of the printer, as
the
Setting Up the Printer
first time
the
1-23