Description Of Charger; Power Recharging Procedure - ICON i40L Owner's Manual

Owner's Manual High Voltage Batteries

Description of Charger

The on-board charger is located beneath the seat. It
begins the charge cycle after connecting the power
plug to the charging receptacle cap located below the
driver's seat. The 48v ICON (1.5kw) On-Board Charger.
This charger comes with a 48 Volt output and a max
amperage output of 20 Amps.
It is connected with the AC power grid through the
charging plug. The 110VAC alternating current is
converted into direct current to charge the power
batteries. The charging state is monitored, and the
charging power is adjusted according to the charging
state to realize the intelligent control of electric vehicle
charging.

Power Recharging Procedure

The charger can detect, track, and protect charged
batteries in a dynamic and automatic manner, maintaining
them in the optimal critical state.
01. Open the charging port lid and align and insert the plug of
the power cord to the charging socket.
02. Connect the other end of the power cord to a 110V
household power source.
03. When the charging gun is working.
04. Charging starts there is an indicator 100% green, >80%
yellow, <80% red
05.
07. When charging is completed, unplug the household power
supply first and the charging socket connecting to the
vehicle body. Push the charging port lid back to its original
position.
06. It will automatically turn off
when the battery is fully
charged, and the charging gun
stops working.
44