After Assistant Operations Are Finished - Yamaha NAVIGO Owner's Manual

6.3. After Assistant Operations are Finished

(1) Park the wheelchair on a flat location.
(2) Turn off the power switch.
(3) Apply the parking brakes.
(4) Set the left and right clutch levers in the power drive position.
(5) Have the user get off the wheelchair.
(6) Disconnect the battery from the wheelchair.
Store the battery with the protective cap on it.
● After you are done traveling in assistant power driver mode, be sure to turn the power off.
If the power is on when the user get off the wheelchair, the body may hit against the
switches, causing it to start moving, and you or other people in your surrounding area may
get injured.
● Position the wheelchair in a level and stable location next to a bed or chair. If you park
the wheelchair on an incline, the user may lose balance and fall when trying to get off the
wheelchair.
● If the user gets off the wheelchair with the left and right clutch levers in the manual position
and with the parking brakes released, the wheelchair may move unexpectedly, causing the
user to fall off and be injured. When getting off the wheelchair, make sure that the left and
right clutch levers are in the power drive position and the parking brakes are applied.
● Be sure to store the disconnected battery with the pro-
tective cap on it. Exposed contacts can cause short
circuits and lead to a fire or battery rupture.
WARNING
WARNING
Power
switch
Protective cap
6
53