Epson Stylus Photo R2000 Series Basic Manual page 20

5. For the
Print Quality
Options
Use the Speed/Quality slider to set from the following quality levels:
■
LEVEL 1
■
LEVEL 2
■
LEVEL 3
■
LEVEL 4
speed.
■
LEVEL 5
for canvas media).
Then select from the following additional options, and click
■
High Speed
■
Edge Smoothing
■
Finest Detail
graphics, and line art. (This setting does not affect photographs.)
■
Gloss Optimizer
6. Select one of the following as the
■
Epson Standard (sRGB)
■
Adobe RGB
Use this setting if your source file was captured in Adobe RGB.
20
Printing From Start to Finish
setting, select
to display a window like this:
for fast printing with draft quality.
for everyday text and image printing.
for photos and graphics with good print quality and speed.
for photos and graphics with high print quality and slower
for the best print quality and slowest print speed (best to use
for fast, bidirectional printing at lower quality.
to improve the quality of low-resolution images.
for sharper edges on vector-based data including text,
to add a glossy finish to your print.
matches images colors to the Adobe RGB color standard.
or
Speed Quality
setting:
Mode
increases the contrast in images.
, or select
Quality
:
OK