Loading Thick Media - Epson Stylus Photo R2000 Series Basic Manual

3. If you are finished printing on roll paper or canvas media, press and hold the
M roll paper button for 3 seconds to feed the paper backward and out of the
printer. If it does not feed all the way out, press the M roll paper button again.
4. Turn the knobs on the roll paper holders backward to roll up the paper, then
remove the paper and holders from the printer.
I
5. Press the
Store the unused roll paper or canvas media in its original package away from high
temperatures, humidity, and direct sunlight.

Loading Thick Media

Use the front manual feed slot to load 13 × 19-inch media that is 1.0 to 1.3 mm
thick.
Note:
Make sure there is enough space behind the printer for the media to feed through the
printer.
1. Turn on the printer.
2. Remove any roll paper, canvas media, or paper loaded in the sheet feeder or
single sheet guide. Then close the paper support.
3. If necessary, remove the single sheet guide (see page 8) or roll paper holders
(see page 12).
4. Open the output tray.
paper button to stop the
I
paper light from flashing.
Loading Paper
13