ELEVEN Free Manual page 25

Record enable the track, or enable TrackInput
5
monitoring (Pro Tools HD only) and check your
levels.
When you're ready, arm the Pro Tools Trans-
6
port and press Record to record your part.
Guitar input
Audio track for recording dry, while hearing Eleven Free
The audio that is recorded is the dry (unproc-
essed) signal only, while the audio being heard
is processed through Eleven Free and any other
plug-ins inserted on the track.
Eleven Free
Recording Eleven Free
(Record Processed Track to Disk)
In this workflow, the audio output of Eleven
Free is recorded to disk while tracking. Usually,
no additional dry track is recorded.
This method commits your track to the original
Eleven Free tone used while tracking. It requires
two tracks (an Auxiliary Input and an audio
track), but after tracking, the plug-in can be de-
activated or removed to free up processing re-
sources.
To record guitar with Eleven Free while playing:
Choose Track > New.
1
Configure the New Tracks dialog as follows:
2
• Create one mono Auxiliary Input track.
• Click the Add Row button (+).
• Create one mono audio track.
• Click Create.
In the Mix (or Edit) window, configure the
3
Aux Input by doing the following:
• Click the Input selector and choose your
guitar input (the audio interface input your
guitar is plugged in to).
• Click the Output selector and choose Bus 1.
• Click the Insert selector and select Eleven
Free.
Chapter 4: Using Eleven Free 21