Table of Contents
Advertisement
chapter 3
Input Calibration and QuickStart
This chapter shows you how to get connected, calibrated, and cranking through Eleven Free.
Throughout this guide, references to Pro Tools LE also apply to Pro Tools M-Powered.
Before You Begin
Eleven was designed to model the essential aspects of each amplifier including characteristics of the
input stage. Providing an appropriate level of signal delivers the most accurate response from the
plug-in.
• If you're working with pre-recorded guitar tracks, see "Working with Pre-Recorded Tracks" on
page 12.
• If you're working with a live guitar signal, follow the steps on the next few pages for optimal in-
put level calibration. Input calibration takes only a couple of minutes, and helps ensure the best
results with Eleven, its amps, and its factory presets.
Source
Hardware
Vol at max
Hardware input gain
Figure 1. Basic gain stages to calibrate live guitar input for Eleven
Pro Tools
Input LED
(Should be
yellow or
orange)
Pro Tools level
Chapter 3: Input Calibration and QuickStart
Eleven
7
Advertisement
Table of Contents
